Edgetec Matador® Mini Post Balustrade System

• Matador® Mini Post Balustrade is for Domestic and Residential Occupancy types A, A Other and C3 Residential only Occupancy Types as per AS/NZ 1170.1.2002
• Suitable for both balustrading and pool fencing
• Up to Very High Wind Zone 

Limitations on Use

• Not suitable for C1/C2, C3, C5 or D Commercial Occupancy Type
• Edgetec Matador® Mini Post balustrade must only be installed in accordance with the Edgetec Matador Mini Post product manual Issue 10-21 v1
• Glass must have a minimum strength of 100mpa
• All glass edges must be polished
• Up to Very High Wind Zone 

Statement of Building Code Compliance

• Designed and manufactured in New Zealand, the Edgetec Matador® Mini Post balustrade system has been engineered and tested by independent engineers to comply with NZ standards NZS4223.3.2016, AS/NZS1170, New Zealand Building Code B1, B2 and F4, NZBC Clause F9 & 162C of the Building Act (pool safety legislation), NZS8500:2016.
• Edgetec Matador® Mini Post balustrade is suitable for Occupancy A, A other and C3 Residential
• An interlinking top rail has been incorporated into the Edgetec range to comply with new 2016 balustrade regulations — NZS4223.3.2016
• Any deviation from standard fabrication or installation must be accompanied by a site-specific PS1, with site-specific calculations and drawings

In-Service History

Juralco has over 18 years of experience designing and installing balustrades throughout New Zealand and continues to focus on supporting and developing its dealer network.

The Edgetec Matador® Mini Post Balustrade range was introduced in 2021.

Other Performance Attributes

• All infill glass must be toughened safety glass, complying with AS/NZS 2208
• Dulux Duralloy powder coating is used for properties greater than 100 metres from high tide level, where AMA 2603 performance is required
• Dulux Duratec powder coating must be used for properties greater than 10 metres and up to 100 metres from high tide level where AMA 2604 performance is required